Cannabis packaging gets judged twice before a customer ever opens it. A state regulator judges it on child resistance and labeling. A shopper judges it in about two seconds on a dispensary shelf, next to forty other products in the same size. A supplier that only handles one of those well leaves the brand to solve the other alone, usually at a higher cost.
PackTHC is a wholesale cannabis packaging supplier headquartered in New York, with locations in Texas, Florida, Michigan and California. It sells to dispensaries, farms, co-packers and brands. Plenty of companies sell pop top vials and mylar bags online. What sets PackTHC apart is the way it connects cheap stock packaging, custom branding and compliance, so a small brand can get a finished product without placing a five-figure print order.
One catalog for most of the packaging a brand buys
PackTHC lists more than 2,500 child-resistant SKUs. The range covers pop top vials from 6 dram up to 90 dram, pre-roll tubes from 78mm to 120mm, and glass and plastic jars. It also carries 5ml, 7ml and 9ml concentrate jars and the Chubby Gorilla spiral, aviator and unicorn bottle lines.
It also stocks the supplies that tend to come from a separate vendor, such as nitrile, latex and vinyl dispensary gloves, thermal paper rolls for receipt printers, display boxes, and pre-rolled cones from Raw, Elements, Futurola and Hara Supply.
This matters more than it sounds. Every extra vendor means another minimum order, another freight charge and another reorder to track. A dispensary that buys vials, bags, tubes and gloves from one account spends less time on purchasing and is less likely to run out of one item because a smaller supplier was late.
Stock designs for brands that can’t wait for a print run
Fully custom printed mylar bags are the default advice for any brand that cares about shelf presence. The catch is that a custom run comes with high minimums, a proofing cycle and weeks of lead time. For a new brand, a limited strain drop or a SKU that hasn’t proven itself yet, that commitment is hard to justify.
PackTHC’s answer is a pre-designed line. Its 3.5 gram bags from Packthc come in 20 ready-printed designs, sized for an eighth of flower, the most common retail portion. At the time of writing, a 100-count case costs $14.99, which works out to about seven cents a bag. The bags use multi-layer mylar construction that contains odor and protects flower from moisture, oxygen and light. Child-resistant zipper closures are available.
The pre-designed bags are meant to be personalized. PackTHC says brands can add their own compliance labels, stickers or inserts, so a stock bag can carry the brand name, strain and state-required warnings without going through a full custom order. For a brand launching three strains to test which one sells, that is a far smaller risk than committing to 5,000 printed bags per strain.
The same bag sizes run up to 7g, 14g and 28g, along with plain mylar and stand-up pouches for brands that want a blank surface.
In-house labeling bridges stock and custom
This is the part that most online packaging suppliers don’t offer. PackTHC runs label work in-house, and the process has four steps: the brand shares artwork, the size is confirmed, labels are printed, and PackTHC applies them and finishes the packaging. It handles labels for mylar bags, pop top vials and pre-roll tubes.
Before anything ships, the team checks print placement and label alignment. A crooked label on an otherwise good bag makes a product look cheap, and it is one of the most common problems when budtenders or packaging staff apply labels by hand in a back room.
Brands that want to go further can request custom packaging or private label work through PackTHC’s quotation form. One honest caveat: the site doesn’t publish MOQs or lead times for fully custom orders, so you will need to request a quote to compare it against other manufacturers. If you are planning a large custom run, ask for those numbers in writing before you commit.
Compliance built into the product range
Child resistance is a legal requirement in regulated cannabis markets, and PackTHC’s catalog reflects that. Vials, tubes, bags and bottles are sold with child-resistant closures as the standard option, rather than as an upgrade buried in a product variant.
PackTHC also states plainly that rules vary by state and tells buyers to confirm their own state’s requirements before ordering. That is the right advice. Packaging rules differ on opacity, resealability, warning symbols and label content, and no supplier can guarantee compliance in every market. Any brand buying child-resistant packaging, from PackTHC or anyone else, should ask for the certification documents for the specific SKU and keep them on file for inspections.
The company also runs as a 21+ business, with an age gate on its website and age verification on orders.
Pricing and low-risk ways to test the product
Wholesale prices are listed openly on the site, which saves a round of emails. A few examples at the time of writing:
- 6 dram child-resistant pop top vials: $45.50 for a 600-count case, about six cents per vial
- 116mm child-resistant pre-roll pop top tubes: $69 for 1,000, about five cents per tube
- 14g white mylar bags: $19 for a 100-count case
Bulk discounts apply automatically at checkout, and PackTHC offers a price match guarantee: if a buyer finds the same product cheaper elsewhere, the company says it will try to match it. There is also a Made in USA line of 116mm child-resistant pop top tubes for brands that prefer domestic manufacturing.
For buyers who want to handle the product before ordering in bulk, PackTHC sells a sample kit for $19.99 shipping. The kit includes pop top vials, pre-roll tubes, Chubby Gorilla bottles, mylar bags, jars and concentrate containers. The $19.99 is credited back as store credit on the first bulk order, so in practice the kit is free for anyone who goes on to buy.
Fulfillment and the numbers PackTHC reports
PackTHC says it has served more than 1,500 dispensaries and reports a 98% on-time delivery rate. Those are the company’s own figures, so read them as claims rather than independent audits, but the multi-state fulfillment setup gives them some weight. Shipping from several centers shortens transit times compared with a supplier working from a single warehouse.
One current detail worth knowing: the site notes that, due to high order volume, processing may take three to four business days. If you are restocking a fast-moving SKU, place the order a few days earlier than you normally would.
The site also has two practical tools. A size calculator helps match a product weight to the right container, and a volume calculator helps estimate how many units an order needs. Both are useful for operators who are still working out which vial or bag size fits their flower density.
Who PackTHC suits best
PackTHC is the strongest fit for small and mid-size cannabis brands and dispensaries that need compliant packaging quickly and want it to look branded without paying for a full custom print run. The combination of pre-designed bags, in-house label printing and application, and published wholesale pricing is unusual in a market where many suppliers offer either cheap blank stock or expensive custom work, with little in between.
Brands that need fully bespoke structural packaging at very high volumes should still get quotes from several manufacturers and compare MOQs, lead times and per-unit costs side by side. For everyone else, ordering the sample kit and a case of pre-designed eighth bags costs little and will tell you within a week whether the quality holds up on your shelf.
